Product Description
RG-1002 insect electrocutor is designed as a wall and corner mount light trap to be installed inside buildings to control flying insects.
The RG-1002 has an easy to open front door panel which allows you to quickly empty the protected insect tray, clean the electric contact grid and replace the U.V. insect bulbs.
The white powder coat finish reflects the U.V. light for maximum attraction.
Install in a low position, 1 to 2 feet above the floor, where flying insects are most active.
* UL listed, 115v/60hz, 6' grounded cord.
* FDA & USDA accepted.
* 80 watts of U.V. insect attraction.
* 3 year limited warranty.
* White powder coat steel construction.
* Covers 2,500 square feet, 50 linear feet.
* 57"H x 14"W x 5.5"D.
* 24 hour, non-chemical trapping.
The RG-1002 has an easy to open front door panel which allows you to quickly empty the protected insect tray, clean the electric contact grid and replace the U.V. insect bulbs.
The white powder coat finish reflects the U.V. light for maximum attraction.
Install in a low position, 1 to 2 feet above the floor, where flying insects are most active.
* UL listed, 115v/60hz, 6' grounded cord.
* FDA & USDA accepted.
* 80 watts of U.V. insect attraction.
* 3 year limited warranty.
* White powder coat steel construction.
* Covers 2,500 square feet, 50 linear feet.
* 57"H x 14"W x 5.5"D.
* 24 hour, non-chemical trapping.